SYJ-50 Abrasive Cutting Machine Heavy Duty Cut-off Saw For Cutting Metallographic Sample
1. Metalographic sample cutting machine is a manual high-speed cutting equipment.
2. Metallographic sample cutting machine is mainly used for cutting various metallographic samples with high-speed rotating grinding discs. Abrasive Cutting Machine is widely used in colleges and universities, scientific research institutes, steel, automobiles, machine tools and other fields.
3. The Metallographic sample cutting machine is small in size, saving laboratory space, and Abrasive Cutting Machine equipped with a protective cover for safe operation.
Metallographic Sample Cutting Machine Main Features:
1. The metallography specimen cutting machine is equipped with dual quick clamps, which make sample fixing quick and convenient. metallographic cutting machine It is suitable for fixing crankshafts, valves and other complex-shaped objects.
2. The metallography specimen cutting machine uses a side-pressure operating lever, which is convenient and quick to operate.
3. The metallography specimen cutting machine has safety lighting and a transparent resin observation window, which facilitates observation during the cutting process and is safe and reliable.
4. The metallography specimen cutting machine table is made of stainless steel to prevent rust and corrosion.
5. Metallographic Cut-Off Machines have built-in coolant pipelines that can directly and quickly supply coolant to the sample to avoid overheating and changes in the metallographic structure during the cutting process.
Metallographic Cut-Off Machines Technical Parameters：
Product name | SYJ-50 heavy duty cut-off saw (for cutting metallographic samples) |
Product model | SYJ-50 |
Conditions for installation | 1. Temperature and humidity: 10-85%RH (at 25℃ without condensation) Temperature: 0-45℃. 2. There are no strong earthquake sources and corrosive gases around the equipment. 3. Power supply: three-phase four-wire: AC380V 50Hz C16A air switch must have a good ground wire. 4. The cooling water equipment is equipped with an upper water outlet and a lower water outlet, and you need to connect the tap water and drainage (circulating water tank) by yourself. 5. Air source: no such requirement. 6. Workbench: Recommended. size: 800mm×650mm×700mm, load-bearing over 100kg. 7. Ventilation device: good ventilation environment, no special ventilation device requirements are required. |
Metallographic cutting machine major parameters (specification) | 1. Power supply port: three-phase: AC 380V 50Hz 2. Total power: 1.2KW 3. Spindle speed: 2800r/min 4. Spindle drive motor: three-phase AC asynchronous motor: AC 380V 1.1kW 5. Cutting workpiece size: Ø50mm×50mm 6. Maximum opening of clamp (caliper): ≥50mm 7. Saw blade size: outer diameter: Ø250mm, inner diameter: Ø25.4mm or Ø32mm, thickness: 2mm |
|
|
|
|
8. Metallographic Cut-Off Machines dimension and weight： Dimension: :750mm×620mm×650mm Weight: ≈85kg
|
18790258621 
