1. Diamond Saw is a cutting equipment suitable for precision cutting of material analysis samples. Diamond Saw can cut various crystals (sapphire, garnet, etc.), composite materials, organic polymer materials, etc.
2.Diamond Saw can replace different Diamond Saw cutting blades according to different types of cutting materials.
3. Low speed diamond cutting machine is small in size and easy to operate. The spindle rotation speed of Diamond Saw is infinitely adjustable.
1. Diamond Saw is a cutting equipment suitable for precision cutting of material analysis samples. Diamond Saw can cut various crystals (sapphire, garnet, etc.), composite materials, organic polymer materials, etc.
2.Diamond Saw can replace different Diamond Saw cutting blades according to different types of cutting materials.
3. Low speed diamond cutting machine is small in size and easy to operate. The spindle rotation speed of Diamond Saw is infinitely adjustable.
Diamond Saw main features:
1. Diamond Saw has high torque, low noise, smooth operation and compact structure.
2. The spindle of Diamond Saw has high operation precision, and the horizontal feed position of the sample processed by Low Speed Diamond Wheel Saw can be fine-tuned.
3.Diamond Saw is equipped with a 2D fixture so that the sample processed by Low Speed Diamond Saw can be positioned and cut at the best angle.
4. Low speed diamond cutting machine can be equipped with blades of various materials to meet the cutting requirements of different materials.
5. There is a coolant tank below the Low speed diamond cutting machine. As the Blade Saw rotates, the coolant is brought from the coolant tank to the sample, taking away the heat generated during the cutting process of the Blade Saw in time to prevent the sample from heating up and causing its texture to change.
6. The Low speed diamond cutting machine is equipped with a limit device to enable unattended cutting.
Low Speed Diamond Saw technical parameters：
Product Name | SYJ-150 Low Speed Diamond Saw | |
Product Model | SYJ-150 | |
Conditions for Installation | 1.This equipment is required to be used with a temperature of 0-45℃, and a humidity of 10-85%RH (at 25℃ no condensation). 2.There is no strong source and corrosive gas around the equipment. 3.Electricity: AC100~240V 50/60Hz 10A , with good grounding (this is a must). | |
Major Parameters (Specification) | 1.DC 24V,6.67A Power Adaptor(included) | |
2.Drive motor 50W | ||
3.Spindle Speed Variable from 25 to 600 rpm | ||
4.Differential head: mechanical |
| |
5.Maximum feed stroke of slide: 50mm |
| |
6.Slide fine adjustment stroke: 25 (accuracy 0.01) mm mechanical | ||
7.Saw blade size: Φ76~Φ100×Φ12.7mm | ||
8.Maximum cutting depth: 25mm | ||
9. Two-dimensional fixture Horizontal angle: 360° Tilt angle: ±15° |
| |
10.Loading block size: 25×50mm | ||
11.Vise opening: 25mm |
| |
12.Dimension and Weight Dimension370×330×330mm Weight: 12kg |
| |
Note: Specifications of the "power adapter" that comes with the machine as standard: IN: AC100-240V 50/60Hz 160W. OUT: DC-24V 6.67A. The actual power supply of the device is subject to the label attached to the back of the product. | ||
18790258621 
