VTC-100 Vacuum Spin Coater is equipped with 3 vacuum chucks (for standard) of different sizes, and different vacuum chucks can be selected according to the size of samples. During working, VTC-100 vacuum spin coater uses vacuum plate adsorption method to fix the sample onto the sample plate. The equipment uses two-stage program to control the speed.
VTC-100 Vacuum Spin Coater (8K rpm, 4" Wafer Max.) With 3 Vacuum Chuck
VTC-100 Vacuum Spin Coater is equipped with 3 vacuum chucks (for standard) of different sizes, and different vacuum chucks can be selected according to the size of samples. During working, VTC-100 vacuum spin coater uses vacuum plate adsorption method to fix the sample onto the sample plate. The equipment uses two-stage program to control the speed.
Main Features
1. The speed is controlled by a two-stage program：the glue is injected in the first low-speed stage, and the glue is leveled in the second high-speed stage.
2. The sample is fixed by vacuum adsorption, which is easy to operate and convenient to take and place the sample.
3. Cast aluminum structure, stable operation and low noise
4. The power supplies for motor and for controller are supplied independently.
5. The speed regulation is controlled by a single chip computer with high anti-interference, and the speed is very stable within the range of 1000 to 8000RPM.
6. LED digital display, with spin coating countdown display function
7. The oilless parallel-bar vacuum pump has the advantages of small size, simple structure, easy operation, convenient maintenance, and no environmental pollution.
Technical Parameters
Product Name | VTC-100 Vacuum Spin Coater |
Product Model | VTC-100 |
Installation Conditions | This equipment is required to be used at an altitude of 1000m or less, a temperature of 25℃±15℃, and a humidity of 55%Rh±10%Rh. 1. Water: equipped with water inlet and outlet 2. Electricity: AC220V 50Hz, must have good grounding 3. gas: N/A 4. Workbench: size 600mm×600mm×700mm, bearing more than 50kg 5. Ventilation device: needed
|
Main Parameters (Specification) | 1. AC220/110V 50/60Hz 2. Power: 600W 3. Rotation speed: 500rpm-8000rpm 4. A two-step coating program can be set, and the speed stability is ±1%, making the coating more uniform. SPD1 rotation speed: valid within 500 to 8000RPM T1 time: valid within 1 to 600s SPD2 rotation speed: valid within 500 to 8000RPM T2 time: valid within 1 to 600s 5. The diameter of the sample plate: 100mm, counter clockwise rotation 6. The ambient temperature is 5-40℃, the relative humidity is not more than 85%RH, and there is no strong vibration source or corrosive gas around the equipment. |
Product Dimension and Weight | Dimension: 260mm×380mm×330mm weight:20kg |
Standard Accessories
No. | name | qty | picture |
1 | Vacuum Chuck (PP,Ø25mm,Ø50mm,Ø100mm) | 1 pcs each | |
2 | Injector/Syringe | 1 pcs |
|
3 | Oilless Vacuum Pump | 1 pcs | - |
Warranty
One year limited with lifetime support (not including rusted parts due to inadequate storage conditions)
18790258621 
