VTC-50A Spin Coater adopts independent power supply systems for motor part and control part, and the speed control system adopts single-chip microcomputer with high anti-interference to control, so that the rotation speed is very high and stable in the range of 1000-8000RPM. The coater has two stages during operation, namely T1 stage at low speed time and T2 stage at high speed time.
Desktop Vacuumless Spin Coater-VTC-50A
VTC-50A Spin Coater adopts independent power supply systems for motor part and control part, and the speed control system adopts single-chip microcomputer with high anti-interference to control, so that the rotation speed is very high and stable in the range of 1000-8000RPM. The coater has two stages during operation, namely T1 stage at low speed time and T2 stage at high speed time.
Main Features
1. It adopts cast aluminum shell structure and acrylic upper cover for clear observation over the coating process.
2. A single-chip microcomputer with high anti-interference is used for control, and the operation is stable at high speed.
3. English operation interface
4. The sample is fixed onto a special polypropylene sample chuck, which does not need vacuum adsorption or bonding to fix the sample. With this simple fixing method, the substrate will not be deformed and there is no damage to the substrate. Slots of different shapes and sizes are opened in the center of the template to fix the substrate according to the shape and size of the substrates.
5. The glue injecting and glue leveling process is controlled independently to ensure the uniformity of the film layer after coating.
Technical Parameters
Product Name | VTC-50A Spin Coater |
Product model | VTC-50A |
Installation Conditions | This equipment is required to be used at an altitude of 1000m or less, a temperature of 25℃±15℃, and a humidity of 55%Rh±10%Rh. 1. Water: equipped with water inlet and outlet 2. Electricity: AC220V 50Hz, must have good grounding 3. gas: N/A 4. Workbench: size 600mm×600mm×700mm, bearing more than 50kg 5. Ventilation device: NOT needed |
Main Parameters (Specification) | 1. AC220/110V 50/60Hz 2. Power: 150W 3. Rotation speed: 500rpm-8000rpm 4. A two-step coating program can be set, and the speed stability is ±1%, making the coating more uniform. SPD1 rotation speed: valid with 500-8000RPM T1 time: valid with 1--60s SPD2 rotation speed: valid with 500-8000RPM T2 time: valid with 1--60s 5. The diameter of the sample plate: 100mm 6. The ambient temperature is 5 to 40℃, the relative humidity is not more than 85%RH, and there is no strong vibration source or corrosive gas around the equipment. |
Product Dimension and Weight | imension: 260mm (length) × 380mm (width) × 330mm (height) Weight: 20kg |
18790258621 
